Leitungsschläuche
?* Informationen zur Lieferzeit und Preisen
-
Wärmebeständige Spiralschläuche / Für Heißlufterzeuger
MISUMI
[Merkmale] Ein hitzebeständiger Kanalschlauch. -Schneideservice ist verfügbar.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Flexibler Schlauch Feuerfeste P-Ausführung
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedJetzt konfigurierenab∗ ： 121.69 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
Minimum Lieferzeit ： 10 Arbeitstage -
Tiflex-Schlauch P-Modell
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Jetzt konfigurierenab∗ ： 77.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralschläuche / Aluminium-Ausführung
MISUMI
[Merkmale] Hoch elastisch und flexibel, kann kompakt gelagert werden. Ein Aluminium-Typ.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenab∗ ： 26.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralschläuche / Abriebfest / Antistatisch
MISUMI
[Merkmale] Hohe Kälte-, Hitze- und Abriebfestigkeit. [Werkstoff] Es ist Polypropylen.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Spiralschläuche / Ölbeständig
MISUMI
[Merkmale] Dieses Produkt ist halbtransparent, so dass Sie sehen können, was transportiert wird. [Werkstoff] Es ist aus Polypropylen.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Saugschlauch mit Spiralverstärkung / Leichte Ausführung
MISUMI
[Merkmale] Dieser Kanalschlauch ist leicht zu biegen, leicht und einfach zu verarbeiten.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Ti-Kanalschlauch für abriebfestes GL-Modell.
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
Flexibler Schlauch AP-Ausführung
TIGERS POLYMER
Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
[Features]
･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
· Flexible, lightweight with superior workability.
· The allowable continuous service temperature is 100˚C or lessJetzt konfigurierenab∗ ： 91.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Verzinktes Stahlblech, flexibel (flexibles Eisen) Kompaktausführung
KURIMOTO
Thin zinc plating steel plate flexible duct. It has been compressed to 1 m: Extend it before use. [Please study the safety precautions in the catalog.] Sold individually, starting from one unit.Jetzt konfigurierenab∗ ： 31.85 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Saugschläuche mit Spiralverstärkung / Ölbeständig / Ohne Stutzen
MISUMI
[Merkmale] Ein Kanalschlauch mit hoher Ölbeständigkeit. [Werkstoff] PVC.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Spiralschläuche / Drehbare Ausführung
MISUMI
[Merkmale] Dieser Schlauch kann in der Größe der Bohrung variiert werden. [Werkstoff] Es ist Polypropylen.- 2D / 3D CAD Daten verfügbar
Jetzt konfigurierenMinimum Lieferzeit ： 7 Arbeitstage -
Leitungsschlauch, Schlauch N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
Leitungsschlauch, Harter Schlauch N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.Jetzt konfigurierenMinimum Lieferzeit ： 56 Arbeitstage -
Leitungsschlauch, D-Ausführung,
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.Jetzt konfigurierenMinimum Lieferzeit ： 16 Arbeitstage -
Leitungsschlauch, Schlauch EE-Ausführung,
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.Jetzt konfigurierenMinimum Lieferzeit ： 9 Arbeitstage -
Leitungsschlauch, New-Kana-Schlauch
KANAFLEX CORPORATION
[Features]
· Superior heat resistance with a reinforced cord.
▪ Light in weight, flexible, and labor-saving.
· Cutting and mounting are easy and piping work can be performed easily.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Flexibler Schlauch, T-Ausführung,
KANAFLEX CORPORATION
Lightweight and expands/contracts freely. Goes down to 1/3-1/4 of its length, minimizing storage space before mounting. Easy Cutting/mounting for simple pipe work.Jetzt konfigurierenab∗ ： 127.12 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Schlauch öldicht
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.Jetzt konfigurierenMinimum Lieferzeit ： 16 Arbeitstage -
Leitungsschlauch, Metallschlauch (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.Jetzt konfigurierenab∗ ： 137.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Metallschlauch (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easilyJetzt konfigurierenab∗ ： 329.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Kana Aluminiumschlauch
KANAFLEX CORPORATION
[Features]
▪ Flexible, bendable, and easy piping in narrow spaces.
▪ Shrinkage to 1/10 and can be stowed compactly (II type).
▪ Lightweight and portable.
▪ Hose saves inventory and transportation space.
· Cutting and mounting are easy and piping work can be performed easily.Jetzt konfigurierenab∗ ： 81.31 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Kana Aluminium, Ausführung II
KANAFLEX CORPORATION
Flexible and bendable, for easy deployment in tight spaces. Can be stowed at 1/10 its full extended length. Lightweight and portable. Lets you save inventory and transportation space.Jetzt konfigurierenab∗ ： 81.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Isolationsschlauch S
KANAFLEX CORPORATION
[Features]
· This duct hose is for ventilation of highly insulated, airtight houses.
· High thermal insulation effect prevents condensation.
· Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
· Single and double types available.Jetzt konfigurierenMinimum Lieferzeit ： 14 Arbeitstage -
Jetzt konfigurieren
Minimum Lieferzeit ： 11 Arbeitstage -
Jetzt konfigurieren
Minimum Lieferzeit ： 10 Arbeitstage -
TAC Leitung D
TOTAKU INDUSTRIES
Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
[Features]
Achieves labor savings due to bendability and low weight.
· Cutting and mounting are easy and piping work can be performed easily.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Leitung EE
TOTAKU INDUSTRIES
A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Aluminiumleitung
TOTAKU INDUSTRIES
For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
[Features]
· Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
· TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
· Repeatedly bendable. Excellent heat resistance (up to 80°C)Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Faserkanal
TOTAKU INDUSTRIES
[Features]
▪ It can be stretched due to reinforced cord, and has excellent bending durability.
▪ Ivory white colored ring that changes the image of vinyl duct, matches the new equipment.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Transparente Leitung
TOTAKU INDUSTRIES
Transparent TAC duct EE allows the user to verify what is being transported.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Helanleitung
TOTAKU INDUSTRIES
Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
[Features]
Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
· Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
· Duct hose resistant to ozone cracking that can occurs in conventional rubber hosesJetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Festrohr PP
TOTAKU INDUSTRIES
Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
[Features]
· 10 to 20% lighter than conventional (PVC) products .
· Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
· The opening diameter can be changed by twisting the opening.
· Can be cut with knives etc.
· Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
· Ducts may be incinerated after use.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Erweiterungsleitung
TOTAKU INDUSTRIES
Duct hose capable of telescoping that can be secured flexibly at any angle in any direction (however, holding force is reduced according to the aperture diameter). Can be shortened to 1/3 - 1/4 of its original length.
[Features]
· Excellent oil resistance.
· Ivory color matches typical equipment.
· Lightweight with superior bend resistance.
· High efficiency due to low interior resistance, which contributes to energy savings.Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
TAC Ölbeständige Leitung
TOTAKU INDUSTRIES
A duct hose with superior oil resistance that can be used for suction and discharge of oil mist.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Hitzebeständiges Rohr IT-13 (Freie Rohrleitung)
TOTAKU INDUSTRIES
[Features]
- Duct formed with aluminum polyester cloth and zinc-plated steel. Supports temperatures of 130°C or below.
- Uses special laminated film to reduce particles created by surface friction.
- Flexible and easy to store/transport.Jetzt konfigurierenab∗ ： 222.35 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
TAC Hitzebeständiges Rohr MD-18 (Befestigte Rohrleitungen)
TOTAKU INDUSTRIES
[Features]
· A reinforcing core of galvanized steel sheeting, glass cloth and aluminum foil is used, making possible use at temperatures of 180°C or lower.
· Flexible and easy to store and transport (avoid repeated expansion and contraction)
· The aluminum glass cloth sheeting used is highly flame-resistant (Flameproof Grade 1).Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
TAC Hitzebeständiges Rohr MD-25 (Freie Rohrleitung)
TOTAKU INDUSTRIES
[Features]
· Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
· Flexible and easy to store and transport.
· The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
TAC Hitzebeständiges Rohr MD-45 (Befestigte Rohrleitungen)
TOTAKU INDUSTRIES
[Features]
· All of components used are made of stainless steel (SUS304), have superior heat resistance performance, and can be used at 450°C or below.
· The materials are not prone to corrosion even from gases containing acids, alkaline substances, solvents, etc.
· This product is designed for fixed piping, but it is also possible to create bends (repeated bending is not supported).Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
Balgkanal
TOTAKU INDUSTRIES
Features large diameter opening yet is lightweight and can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size. Can be used for ventilation, exhaust and dust collection applications in various areas such as construction areas inside manholes or tunnels.
[Features]
Can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size.
Features large diameter opening yet is lightweight and is easy to transportJetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
TAC Leitung AS
TOTAKU INDUSTRIES
TAC SD-AS duct type. Maintains an anti-static effect via the use of a special blended soft resin.
[Features]
TAC SD-AS duct type.
Maintains an anti-static effect via the use of a special blended soft resin.Jetzt konfigurierenMinimum Lieferzeit ： 11 Arbeitstage -
Ti-Kanalschlauch GL-Modell
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistanceJetzt konfigurierenMinimum Lieferzeit ： 9 Arbeitstage -
Ti-Kanalschlauch N-Modell
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformationJetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage -
Ti-Kanalschlauch öldichtes GL-Modell
TIGERS POLYMER
Uses a special oil-resistant material (soft part of the hose) that is not hardened by lubricating oil, cutting oil, etc. Used for oil mist recovery on manufacturing machinery such as lathes and milling cutters.Jetzt konfigurierenMinimum Lieferzeit ： 10 Arbeitstage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Werkstoff |
| Nutzung Schneidservice |
| Eigenschaften |
| ID d(mm) |
| Aussen - D(mm) |
| Farbe |
| Zulässige Flüssigkeit |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | MISUMI | TIGERS POLYMER | KURARAYPLASTICS | TIGERS POLYMER | MISUMI | MISUMI | MISUMI | MISUMI | TIGERS POLYMER | TIGERS POLYMER | KURIMOTO | MISUMI | MISUMI | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Artikelserie | Verzinktes Stahlblech, flexibel (flexibles Eisen) Kompaktausführung | Saugschläuche mit Spiralverstärkung / Ölbeständig / Ohne Stutzen | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| ab∗ | - | 121.69 € *Stückpreis Standardkonfiguration | - | 77.37 € *Stückpreis Standardkonfiguration | 26.19 € *Stückpreis Standardkonfiguration Mengenrabatt | - | - | - | - | 91.83 € *Stückpreis Standardkonfiguration | 31.85 € *Stückpreis Standardkonfiguration | - | - | - | - | - | - | - | 127.12 € *Stückpreis Standardkonfiguration | - | 137.79 € *Stückpreis Standardkonfiguration | 329.71 € *Stückpreis Standardkonfiguration | 81.31 € *Stückpreis Standardkonfiguration | 81.79 € *Stückpreis Standardkonfiguration | - | - | - | - | - | - | - | - | - | - | - | - | 222.35 € *Stückpreis Standardkonfiguration | - | - | - | - | - | - | - | - |
| Minimum Lieferzeit | 7 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 10 Arbeitstage | 56 Arbeitstage | 16 Arbeitstage | 9 Arbeitstage | 11 Arbeitstage | 6 Arbeitstage | 16 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 14 Arbeitstage | 11 Arbeitstage | 10 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 10 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 9 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage |
| Werkstoff | Aluminium / Spezielle Glasbeschichtung / Rostfreier Stahl | Olefin-Harz | PVC | Olefin-Harz | Aluminium | Polypropylen | Polypropylen | Polypropylen / PVC | EPDM | Aluminium | Stahl | PVC | Polypropylen | Elastomer | Olefin-Harz | PVC | PVC | PVC | Olefin-Harz | PVC | Aluminium | Spezielle Glasbeschichtung | Aluminium | Aluminium | PVC | Elastomer | Elastomer | PVC | PVC | Aluminium | PVC | PVC | Polypropylen | Polypropylen | Polypropylen | PVC | Aluminium | Aluminium | Spezielle Glasbeschichtung | Rostfreier Stahl | PVC | PVC | PVC | PVC | PVC |
| Nutzung Schneidservice | Enthalten | Keine | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Keine | Keine | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Keine | Keine | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten |
| Eigenschaften | Flammbeständigkeit / Wärmebeständigkeit / Geringe Partikelfreisetzung | Standard / Flammbeständigkeit / Sonstige | Antistatische Eigenschaften | Standard / Flexibilität / Sonstige | Standard | Abriebfestigkeit / Kältebeständigkeit | Standard / Antistatische Eigenschaften | Standard | Abriebfestigkeit / Wärmebeständigkeit | Wärmebeständigkeit / Flexibilität | Flammbeständigkeit / Flexibilität | Ölbeständigkeit | Standard | Standard / Antistatische Eigenschaften / Wärmebeständigkeit | Standard / Wärmebeständigkeit | Standard | Standard | Standard | Standard | Standard / Ölbeständigkeit | Standard / Flammbeständigkeit | Standard / Flammbeständigkeit | Standard | Standard | Standard | Standard / Abriebfestigkeit / Flexibilität | Standard / Antistatische Eigenschaften / Abriebfestigkeit | Standard | Standard | Standard / Wärmebeständigkeit | Standard | Standard | Standard / Antistatische Eigenschaften / Abriebfestigkeit / Kältebeständigkeit / Wärmebeständigkeit | Standard | Standard | Standard / Ölbeständigkeit | Standard / Wärmebeständigkeit / Geringe Partikelfreisetzung | Standard / Flammbeständigkeit / Wärmebeständigkeit | Standard / Flammbeständigkeit / Wärmebeständigkeit | Standard / Wärmebeständigkeit | Standard | Antistatische Eigenschaften | Standard / Flexibilität | Standard / Flexibilität | Ölbeständigkeit / Flexibilität |
| ID d(mm) | 50.9 ～ 152 | 37.5 ～ 253.5 | 25.4 ～ 203.6 | 37.5 ～ 302 | 39 ～ 150 | 38 ～ 152.4 | 38 ～ 152.4 | 35 ～ 152.4 | 38.1 ～ 208 | 38.1 ～ 101.6 | - | 76.4 ～ 152.4 | 75 ～ 100 | 38.1 ～ 125.9 | 65 ～ 90 | 32.4 ～ 64 | 32.4 ～ 114.3 | 32 ～ 303 | 70 ～ 79 | 76.4 ～ 203.7 | 51 ～ 101.5 | 51 ～ 126.5 | 42.7 ～ 128 | 109 ～ 131.4 | 100.3 | 32 ～ 303 | 38 ～ 203.2 | 32.4 ～ 303 | 32.4 ～ 303 | 39 ～ 300 | 32 ～ 203.7 | 37.3 ～ 203.7 | 38 ～ 303 | 90 ～ 300 | 35 ～ 196 | 50.6 ～ 203.2 | 102.5 | 51 ～ 303 | 51 ～ 303.5 | 52.5 ～ 303.5 | 400 ～ 500 | 32.4 ～ 152.4 | 25 ～ 303 | 16.7 ～ 204.1 | 38.1 ～ 202 |
| Aussen - D(mm) | 54.5 ～ 157 | 41.5 ～ 259.5 | 32 ～ 217.5 | 41.5 ～ 308 | 45 ～ 155.7 | 46.8 ～ 166.2 | 45 ～ 164 | 42 ～ 164.8 | 46 ～ 223 | 42.9 ～ 110 | - | 86.4 ～ 164.8 | 82.4 ～ 107.4 | 44.5 ～ 137 | 71.8 ～ 96.8 | 38.6 ～ 73.2 | 38.6 ～ 125.3 | 39.2 ～ 320 | 73 ～ 82 | 86.4 ～ 217.1 | 55 ～ 105.5 | 55 ～ 130.5 | 45 ～ 130.3 | 111.4 ～ 133.7 | 118 | 38 ～ 322 | 45 ～ 216 | 38.6 ～ 316 | 38.6 ～ 318 | 45 ～ 305.9 | 40 ～ 217.5 | 44.5 ～ 217.1 | 46.8 ～ 328.2 | 97.4 ～ 309.6 | 42 ～ 209.5 | 60.2 ～ 216.5 | 106 | 54.5 ～ 306.5 | 54.5 ～ 306.5 | 56 ～ 306.5 | 418 ～ 520 | 38.6 ～ 164.8 | 32.4 ～ 316.4 | 21.2 ～ 211.5 | 45.9 ～ 215 |
| Farbe | - | Schwarz | Transparent | Dunkelbraun | - | Schwarz | Transparent | - | Schwarz | Grau | Grau | elfenbeinfarben | - | Grau | Grau | Grau | Grau | Weiß | Weiß | Grau | Grau | Grau | - | - | Weiß | Transparent | Transparent | Grau | Grau | Metallfarbe | elfenbeinfarben | Transparent | Schwarz | Grau | Weiß | elfenbeinfarben | Metallfarbe | Weiß | Grau | Metallfarbe | Grau | Transparent | Grau | Grau | elfenbeinfarben |
| Zulässige Flüssigkeit | Chemikalien / Luft / Funken | Luft | Pulver / Getreide / Luft | Luft | Luft | Pulver / Getreide / Luft / Papierschnipsel | Luft | Luft | Pulver / Getreide / Luft / Papierschnipsel | Luft | - | Luft / Ölnebel | Luft | Luft | Luft | Luft | Luft | Luft | Luft | Maschinenöl / Schmiermittel / Luft / Ölnebel | Luft | Luft / Funken | Luft | Luft | Luft | Luft | Pulver / Luft | Luft | Luft | Luft | Luft | Pulver / Getreide / Luft | Pulver / Getreide / Papierschnipsel | Luft | Luft | Luft / Ölnebel | Luft | Luft | Luft / Funken | Chemikalien / Luft | Luft | Getreide / Luft | Chemikalien / Pulver / Luft | Chemikalien / Pulver / Luft | Maschinenöl / Schmiermittel / Ölnebel |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) | 0.006 ～ 0.027 | 0.002 ～ 0.018 | 0.04 ～ 0.08 | 0.002 ～ 0.018 | 0.02 | 0.03 | 0.04 | 0.002 ～ 0.06 | 0.01 ～ 0.05 | 0.03 ～ 0.06 | - | 0.04 | 0.001 | 0.02 ～ 0.06 | - | 0.04 ～ 0.06 | 0.03 ～ 0.06 | 0.02 ～ 0.1 | - | 0.01 ～ 0.04 | 0.007 | 0.007 | 0.01 ～ 0.02 | 0.01 | 0.004 | 0.01 ～ 0.04 | 0.01 ～ 0.04 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.007 ～ 0.02 | 0.02 ～ 0.1 | 0.01 ～ 0.06 | 0.005 ～ 0.03 | - | - | 0.01 ～ 0.05 | 0.007 | 0.007 | 0.007 | 0.007 | 0.003 ～ 0.004 | 0.02 ～ 0.06 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.01 ～ 0.06 |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Werkstoff
-
Nutzung Schneidservice
- Enthalten
- Keine
-
Eigenschaften
-
ID d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 39
- 41
- 42.7
- 50
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 62.4
- 63
- 63.5
- 64
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 109.0
- 113
- 114.3
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 196.0
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 250
- 252
- 252.1
- 253
- 253.5
- 254
- 278
- 300
- 302
- 303
- 303.5
- 359.0
- 400
- 410.0
- 500
- 512.0
-
Aussen - D(mm)
- 21.2
- 24
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87.2
- 87.6
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 208
- 209.5
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 223
- 240.4
- 243.1
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 292.6
- 305.9
- 306.5
- 308
- 309.6
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 378.5
- 418.0
- 431.0
- 520.0
- 532.0
-
Farbe
-
Zulässige Flüssigkeit
-
Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa)
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Leitungsschläuche
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.