NACHI(FUJIKOSHI) Bohreinsätze
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
Aquabohrer EX Flach AQDEXZ
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.ab∗ ： 84.64 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
SG-ESS-Bohrer SGESS
NACHI(FUJIKOSHI)
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.- Mengenrabatt
ab∗ ： 9.27 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
AG-ESS-Bohrer-AGESS
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.- Mengenrabatt
ab∗ ： 14.33 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aqua Bohrer regelmäßig AQDR
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.- Mengenrabatt
ab∗ ： 84.41 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
AG-Startbohrer AGSTD
NACHI(FUJIKOSHI)
HSS drill which is capable of speedy centering, chamfering and V-grooving and boasts a long service life.
[Features]
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used for various processing, from chamfering to V groove machining.ab∗ ： 20.51 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
G Kurzer konischer Schaft-Bohrer GTS
NACHI(FUJIKOSHI)
Taper type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.ab∗ ： 101.91 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer 3-Nut AQD3F
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.ab∗ ： 111.82 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer-EX Schmierbohrung 5D-AQDEXOH5D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.ab∗ ： 116.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aqua Bohrer mit Messer unten 3-Nut AQDED3F
NACHI(FUJIKOSHI)
Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.ab∗ ： 140.20 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Set mit geradem Schaft SD
NACHI(FUJIKOSHI)
A general-purpose HSS drill which is used for the widest range of applications.
[Features]
· Corresponds to the JIS standard.
[Applications]
· Usable in a wide range of applications.ab∗ ： 5.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
AG-Starträser, langer Schaft AGSTDLS
NACHI(FUJIKOSHI)
Long shank type starting HSS drill for deep locations or avoiding interference.
[Features]
· Capable of speedy centering, chamfering and V-grooving and boasts a long service life.
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.- Mengenrabatt
ab∗ ： 33.19 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
AG-ES-Bohrer-AGES
NACHI(FUJIKOSHI)
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.- Mengenrabatt
ab∗ ： 23.33 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DLC-HSS-Bohrer DLCHD
NACHI(FUJIKOSHI)
High-speed drill for high efficiency machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Has low adhesion and eliminates troubles such as chip clogging which are likely to occur in aluminum processing.
[Applications]
· The coefficient of friction is small, and since the aluminum is unlikely to weld, high friction efficiency with aluminum alloys is demonstrated.- Mengenrabatt
ab∗ ： 8.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Kurzer G-Bohrer GSS
NACHI(FUJIKOSHI)
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.- Mengenrabatt
- Auf Lager
ab∗ ： 10.02 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
G-StandardBohrer GSD
NACHI(FUJIKOSHI)
Straight shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.- Mengenrabatt
ab∗ ： 41.19 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
G Konischer Standard-Schaftbohrer GTD
NACHI(FUJIKOSHI)
Taper shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.ab∗ ： 98.12 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG-ES-Bohrer SGES
NACHI(FUJIKOSHI)
HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.- Mengenrabatt
ab∗ ： 14.61 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG-FAX-Öllochbohrer SGOH
NACHI(FUJIKOSHI)
Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.ab∗ ： 241.51 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer-EX Regelmäßig AQDEXR
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.ab∗ ： 108.81 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer-FC-AQDFC
NACHI(FUJIKOSHI)
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.ab∗ ： 107.64 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer schwer AQDH
NACHI(FUJIKOSHI)
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.ab∗ ： 34.41 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Aqua-Mikrobohrer-AQMD
NACHI(FUJIKOSHI)
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.- Mengenrabatt
ab∗ ： 38.11 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Konischer Kobalt-Schaftbohrer COTD
NACHI(FUJIKOSHI)
A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
[Features]
· Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.- Mengenrabatt
ab∗ ： 63.38 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Gerader Schaft, langer Bohrer LSD
NACHI(FUJIKOSHI)
A general-purpose long drill which is used for the widest range of applications.
[Features]
· It supports various drilling depths, so the optimal drill for the processing can be selected from an abundant choice of sizes (groove length, full length).ab∗ ： 46.03 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer AG-Leistungsbohrer AGPLSD
NACHI(FUJIKOSHI)
A drill that can steplessly drill deep holes up to L/D20.
[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
[Applications]
· Ideal for deep hole machining for anything from raw materials to mold steel.- Mengenrabatt
ab∗ ： 24.88 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
G-Öllochbohrer GOH
NACHI(FUJIKOSHI)
General purpose coated oil hole drill.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.ab∗ ： 270.06 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer G-Bohrer GLSD
NACHI(FUJIKOSHI)
Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.- Mengenrabatt
ab∗ ： 163.81 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer-EX-Stub AQDEXS
NACHI(FUJIKOSHI)
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.- Mengenrabatt
ab∗ ： 92.06 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Konischer SchaftbohrerTD
NACHI(FUJIKOSHI)
A general-purpose drill used in the widest ranges of applications.
[Features]
· A standard drill that corresponds to the JIS standard.ab∗ ： 49.21 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Konischer Schaft langer Bohrer LTD.
NACHI(FUJIKOSHI)
A general-purpose long drill which is used for the widest range of applications.
[Features]
· It supports various drilling depths, so the optimal drill for the processing can be selected from an abundant choice of sizes (groove length, full length).
[Applications]
· Select a drill bit suitable for the depth to be drilled prior to commencing drilling work.ab∗ ： 108.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
AG-SUS-Bohrer, kurz AGSUSS
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.- Mengenrabatt
ab∗ ： 8.14 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
AG-SUS-Bohrer, Normalausführung, AGSUSR
NACHI(FUJIKOSHI)
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.- Mengenrabatt
ab∗ ： 9.32 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DLC Normaler Bohrer DLCDR
NACHI(FUJIKOSHI)
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.ab∗ ： 91.27 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DLC Mikrobohrer DLCMD
NACHI(FUJIKOSHI)
An aluminum drill for small diameter hole drilling, which performs high speed wet and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.ab∗ ： 57.05 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer EX Schmierbohrung 3D-AQDEXOH3D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.ab∗ ： 133.03 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer EX Schmierbohrung 8D-AQDEXOH8D
NACHI(FUJIKOSHI)
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.ab∗ ： 167.41 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aquabohrer-Stub AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.ab∗ ： 53.04 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SDSET50 Eisenbearbeitungs-Bohrer, Satz von 50
NACHI(FUJIKOSHI)
[Merkmale] Er kann zum Schneiden von allgemeinem Stahl, Gusseisen und Aluminium verwendet werden. [Merkmale] Es wird Schnellarbeitsstahl mit hoher Härte verwendet.ab∗ ： 238.04 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
COSET19 Bohrer für rostfreien Stahl, Satz 19【19 Stk. pro Packung】
NACHI(FUJIKOSHI)
General purpose cobalt drill.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· A set of 19 pieces with diameters ranging from 1.0 to 10.0 mm and pitch of 0.5 mm.
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.ab∗ ： 257.96 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
GSDSET10 G Beschichtungsbohrer, Satz von 10【10 Stk. pro Packung】
NACHI(FUJIKOSHI)
General purpose coated drill.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
· A set of 10 pieces with diameters ranging from 2.0 to 6.0 mm.
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel and aluminum.ab∗ ： 123.64 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aqua-Bohrer EX flach regelmäßig AQDEXZR
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.ab∗ ： 109.93 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aqua-Bohrer EX halblang AQDEXSL
NACHI(FUJIKOSHI)
A drill capable of consistent, high-performance drilling of deep holes in anything from raw materials through to high hardness steel.ab∗ ： 105.72 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG-ESR-Bohrer SGESR
NACHI(FUJIKOSHI)
High-grade powdered high-speed steel and SG coating realizes the longest life possible for this HSS drill.
[Features]
· It is a high general-purpose drill for a wide range of work materials, from steel and stainless steel to aluminum.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· Enables high precision drilling.ab∗ ： 23.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
AQDEXZOH3D Aqua-Bohrer EX flache Schmierbohrung 3D
NACHI(FUJIKOSHI)
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.ab∗ ： 147.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
G-Kobaltbohrer mit geradem Schaft GCOSD
NACHI(FUJIKOSHI)
General purpose coated cobalt drill.- Mengenrabatt
ab∗ ： 17.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Spezifikationen |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Artikelserie | COSET19 Bohrer für rostfreien Stahl, Satz 19【19 Stk. pro Packung】 | GSDSET10 G Beschichtungsbohrer, Satz von 10【10 Stk. pro Packung】 | |||||||||||||||||||||||||||||||||||||||||||
| ab∗ | 84.64 € *Stückpreis Standardkonfiguration | 9.27 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 14.33 € *Stückpreis Standardkonfiguration | 84.41 € *Stückpreis Standardkonfiguration | 20.51 € *Stückpreis Standardkonfiguration | 101.91 € *Stückpreis Standardkonfiguration | 111.82 € *Stückpreis Standardkonfiguration | 116.24 € *Stückpreis Standardkonfiguration | 140.20 € *Stückpreis Standardkonfiguration | 5.37 € *Stückpreis Standardkonfiguration | 33.19 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 23.33 € *Stückpreis Standardkonfiguration | 8.79 € *Stückpreis Standardkonfiguration | 10.02 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 41.19 € *Stückpreis Standardkonfiguration | 98.12 € *Stückpreis Standardkonfiguration | 14.61 € *Stückpreis Standardkonfiguration | 241.51 € *Stückpreis Standardkonfiguration | 108.81 € *Stückpreis Standardkonfiguration | 107.64 € *Stückpreis Standardkonfiguration | 34.41 € *Stückpreis Standardkonfiguration | 38.11 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 63.38 € *Stückpreis Standardkonfiguration | 46.03 € *Stückpreis Standardkonfiguration | 24.88 € *Stückpreis Standardkonfiguration | 270.06 € *Stückpreis Standardkonfiguration | 163.81 € *Stückpreis Standardkonfiguration | 92.06 € *Stückpreis Standardkonfiguration | 49.21 € *Stückpreis Standardkonfiguration | 108.01 € *Stückpreis Standardkonfiguration | 8.14 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 9.32 € *Stückpreis Standardkonfiguration | 91.27 € *Stückpreis Standardkonfiguration | 57.05 € *Stückpreis Standardkonfiguration | 133.03 € *Stückpreis Standardkonfiguration | 167.41 € *Stückpreis Standardkonfiguration | 53.04 € *Stückpreis Standardkonfiguration | 238.04 € *Stückpreis Standardkonfiguration | 257.96 € *Stückpreis Standardkonfiguration | 123.64 € *Stückpreis Standardkonfiguration | 109.93 € *Stückpreis Standardkonfiguration | 105.72 € *Stückpreis Standardkonfiguration | 23.16 € *Stückpreis Standardkonfiguration | 147.24 € *Stückpreis Standardkonfiguration | 17.83 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 5 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Spezifikationen |
| ||||||||||||||||||||||||||||||||||||||||||||
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 15.8 | 1.01 ～ 19.5 | 1.2 ～ 17.7 | 3.7 ～ 10 | 3 ～ 20 | 7 ～ 31.5 | 4.21 ～ 12.55 | 2.5 ～ 8.7 | 6 | 2.12 ～ 11.9 | 3 ～ 12 | 4.1 ～ 20 | 1.2 ～ 13 | 1.6 ～ 8.7 | 9.4 | 8 ～ 31.5 | 2 ～ 32 | 10 ～ 30 | 2.9 ～ 15 | 2.1 ～ 11.9 | 2 ～ 9.9 | 0.21 ～ 1.7 | 7.1 ～ 40 | 7.1 ～ 13 | 1 ～ 13 | 8 ～ 40 | 10.5 | 2.1 ～ 13 | 8.4 ～ 100 | 7 ～ 50 | 1.01 ～ 20 | 1 ～ 20 | 4 ～ 9.5 | 1.3 | 7 | 5.6 | 4 ～ 12.5 | 1.1 ～ 6 | 1 ～ 10 | 2 ～ 6 | 3.6 ～ 10.5 | 2 ～ 2.9 | 2 ～ 13 | 6.5 | 3.3 ～ 10.5 |
| Groove Length L(mm) | 1.65 ～ 72 | 6 ～ 94 | 8 ～ 87 | 24 ～ 60 | 9 ～ 40 | 45 ～ 114 | 22 ～ 51 | 20 ～ 72 | 28 | 29 ～ 109 | 9 ～ 30 | 43 ～ 140 | 16 ～ 101 | 13 ～ 54 | 81 | 73 ～ 172 | 24 ～ 185 | 75 ～ 174 | 19 ～ 91 | 15 ～ 73 | 12 ～ 43 | 2.5 ～ 15 | 78 ～ 220 | 100 ～ 200 | 37 ～ 225 | 33 ～ 152 | 120 | 10 ～ 49 | 85 ～ 355 | 25 ～ 700 | 6 ～ 94 | 12 ～ 140 | 27 ～ 58 | 15 | 35 | 66 | 22 ～ 51 | - | - | - | 23 ～ 67 | 24 ～ 33 | 24 ～ 101 | 30 | 29 ～ 65 |
| work material | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[◎] / Gusseisen[◎] / Aluminium[○] / Titan[◎] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[○] / Gusseisen[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Gusseisen[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[◎] / Titan[○] | Stahl allgemein[◎] / Gusseisen[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Aluminium[◎] / Kupfer[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[◎] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[○] / Gusseisen[○] | Stahl allgemein[◎] / Gusseisen[◎] | Stahl mit hoher Härte[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[◎] / Gusseisen[○] / Titan[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[◎] / Gusseisen[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[○] / Gusseisen[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Edelstahl[◎] / Aluminium[○] / Titan[○] / Kupfer[○] | Stahl allgemein[◎] / Edelstahl[◎] | Aluminium[◎] / Kupfer[○] | Aluminium[◎] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[◎] / Gusseisen[◎] / Titan[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[◎] / Gusseisen[◎] / Titan[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[◎] / Edelstahl[○] / Gusseisen[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] | Edelstahl[◎] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[◎] / Stahl mit hoher Härte[○] / Edelstahl[○] / Gusseisen[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[◎] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[○] / Stahl mit hoher Härte[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] | Stahl allgemein[○] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] |
| Tool Material Type | Carbid | HSS-Stahl | HSS-Stahl | Carbid | Kobalt HSS | Kobalt HSS | Carbid | Carbid | Carbid | HSS-Stahl | Kobalt HSS | HSS-Stahl | HSS-Stahl | Kobalt HSS | HSS-Stahl | HSS-Stahl | HSS-Stahl | HSS-Stahl | Carbid | Carbid | Carbid | Carbid | Kobalt HSS | HSS-Stahl | Kobalt HSS | Kobalt HSS | Kobalt HSS | Carbid | HSS-Stahl | HSS-Stahl | HSS-Stahl | HSS-Stahl | Carbid | Carbid | Carbid | Carbid | Carbid | HSS-Stahl | Kobalt HSS | HSS-Stahl | Carbid | Carbid | HSS-Stahl | Carbid | Kobalt HSS |
| Overall Length L(mm) | 47 ～ 115 | 38 ～ 168 | 40 ～ 153 | 56 ～ 110 | - | 126 ～ 235 | 66 ～ 110 | 68 ～ 127 | 72 | 55 ～ 146 | - | 89 ～ 210 | 50 ～ 158 | 39 ～ 105 | 125 | 154 ～ 293 | 56 ～ 255 | 144 ～ 265 | 49 ～ 153 | 47 ～ 130 | 44 ～ 93 | 38 ～ 47 | 158 ～ 365 | 200 ～ 400 | - | 83 ～ 250 | 250 | 45 ～ 100 | - | 200 ～ 1000 | 40 ～ 168 | 50 ～ 210 | 59 ～ 108 | 47 | 88 | 118 | 54 ～ 110 | - | - | - | 60 ～ 110 | 56 ～ 64 | - | 88 | 73 ～ 137 |
| Shank Type | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Schaftfräserschaft / Gerader Schaft | - | - | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Gerader Schaft | Gerader Schaft | - | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Gerader Schaft | Gerader Schaft | - | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Kegelgewinde | Gerader Schaft | - | Schaftfräserschaft / Gerader Schaft | Gerader Schaft | Schaftfräserschaft / Gerader Schaft | - | Kegelgewinde | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Gerader Schaft | Schaftfräserschaft | Schaftfräserschaft / Gerader Schaft | - | - | - | - | Schaftfräserschaft | - | Schaftfräserschaft | Gerader Schaft |
| Coating Y/N | Verfügbar | Verfügbar | Verfügbar | Verfügbar | - | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | - | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | N/A | Verfügbar | Verfügbar | Verfügbar | Verfügbar | - | N/A | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | - | - | Verfügbar | Verfügbar | Verfügbar | - | Verfügbar | Verfügbar |
| Coating Type | Sonstige | TiCN | Sonstige | Sonstige | - | TiN | Sonstige | Sonstige | Sonstige | Ohne Beschichtung | - | Sonstige | DLC | TiN | TiN | TiN | TiCN | TiCN | Sonstige | Sonstige | Sonstige | Sonstige | - | Ohne Beschichtung | Sonstige | TiN | TiN | Sonstige | - | - | TiAlN | Sonstige | DLC | DLC | Sonstige | Sonstige | Sonstige | - | - | TiN | Sonstige | Sonstige | - | Sonstige | TiN |
| With/without Oil Hole | N/A | N/A | N/A | N/A | - | - | N/A | Verfügbar | N/A | N/A | - | N/A | N/A | N/A | N/A | - | N/A | Verfügbar | N/A | N/A | N/A | N/A | - | N/A | - | Verfügbar | N/A | - | - | - | N/A | N/A | N/A | N/A | Verfügbar | Verfügbar | N/A | - | - | - | - | N/A | - | Verfügbar | N/A |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.128
- 0.13
- 0.135
- 0.14
- 0.143
- 0.145
- 0.147
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.432
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.632
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1,5
- 1,6
- 1,7
- 1,8
- 1,9
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.5X10D
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.6×10D
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.8×10D
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2,1
- 2,5
- 2,6
- 2,7
- 2,8
- 2,9
- 2×10D
- 2,78
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.1×10D
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.2×10D
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.3×10D
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.4×10D
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.5×10D
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.6×10D
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.7×10D
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.8×10D
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.9×10D
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3,1
- 3,2
- 3,3
- 3,4
- 3,5
- 3,05
- 3,6
- 3,7
- 3,8
- 3,9
- 3×10D
- 3,15
- 3,26
- 3,35
- 3,45
- 3,55
- 3,66
- 3,73
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.1×10D
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.2×10D
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.3×10D
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.4×10D
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.5×10D
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.6×10D
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.7×10D
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.8×10D
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.9×10D
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4,1
- 4,2
- 4,3
- 4,4
- 4,5
- 4,05
- 4,6
- 4,7
- 4,8
- 4,9
- 4×10D
- 4,15
- 4,25
- 4,35
- 4,45
- 4,55
- 4,62
- 4,85
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.1×10D
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.2×10D
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.3×10D
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.4×10D
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.5×10D
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.6×10D
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.7×10D
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.8×10D
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.9×10D
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5,1
- 5,2
- 5,3
- 5,4
- 5,5
- 5,05
- 5,6
- 5,7
- 5,8
- 5,9
- 5×10D
- 5,25
- 5,55
- 5,65
- 5,75
- 5,95
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.1×10D
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.2×10D
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.3×10D
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.4×10D
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.5×10D
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.6×10D
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.7×10D
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.8×10D
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.9×10D
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.97
- 6
- 6,1
- 6,2
- 6,3
- 6,4
- 6,5
- 6,05
- 6,6
- 6.0～6.4
- 6,7
- 6,8
- 6,9
- 6×10D
- 6,15
- 6,25
- 6,35
- 6,53
- 6,75
- 6,85
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.1×10D
- 6.15
- 6.2
- 6.2×10D
- 6.25
- 6.3
- 6.3×10D
- 6.35
- 6.37
- 6.375
- 6.4
- 6.4×10D
- 6.45
- 6.5
- 6.5～6.9
- 6.5×10D
- 6.53
- 6.55
- 6.6
- 6.60 / 8.90
- 6.6×10D
- 6.63
- 6.65
- 6.7
- 6.7×10D
- 6.75
- 6.75 / 9.10
- 6.76
- 6.8
- 6.8×10D
- 6.85
- 6.85 / 9.20
- 6.9
- 6.90 / 9.30
- 6.9×10D
- 6.91
- 6.95
- 6.97
-
7～7.98
- 7
- 7,1
- 7,2
- 7,3
- 7,4
- 7,5
- 7,6
- 7,7
- 7.0～7.4
- 7,8
- 7,9
- 7.00 / 9.50
- 7×10D
- 7,25
- 7,45
- 7,54
- 7,94
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.1×10D
- 7.14
- 7.15
- 7.2
- 7.2×10D
- 7.25
- 7.25 / 9.80
- 7.3
- 7.30 / 9.80
- 7.3×10D
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.4
- 7.40 / 9.80
- 7.4×10D
- 7.45
- 7.49
- 7.5
- 7.5～7.9
- 7.5×10D
- 7.52
- 7.54
- 7.55
- 7.6
- 7.6×10D
- 7.65
- 7.67
- 7.7
- 7.7×10D
- 7.75
- 7.8
- 7.8×10D
- 7.85
- 7.9
- 7.9×10D
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
-
8～8.96
- 8
- 8,1
- 8,2
- 8,3
- 8,03
- 8,4
- 8,5
- 8,6
- 8,7
- 8,8
- 8.0～8.4
- 8,9
- 8×10D
- 8,25
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.1×10D
- 8.15
- 8.2
- 8.2×10D
- 8.25
- 8.3
- 8.3×10D
- 8.33
- 8.35
- 8.4
- 8.4×10D
- 8.43
- 8.45
- 8.5
- 8.5～8.9
- 8.5×10D
- 8.55
- 8.58
- 8.6
- 8.6×10D
- 8.61
- 8.65
- 8.7
- 8.7×10D
- 8.73
- 8.75
- 8.8
- 8.8×10D
- 8.84
- 8.85
- 8.9
- 8.9×10D
- 8.95
- 8.96
-
9～9.97
- 9
- 9,1
- 9,2
- 9,3
- 9,4
- 9,5
- 9,6
- 9,7
- 9,8
- 9,9
- 9.0～9.4
- 9×10D
- 9,52
- 9,53
- 9,55
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.1×10D
- 9.13
- 9.15
- 9.2
- 9.2×10D
- 9.21
- 9.24
- 9.25
- 9.26
- 9.3
- 9.3×10D
- 9.34
- 9.35
- 9.36
- 9.38
- 9.4
- 9.4×10D
- 9.45
- 9.5
- 9.5～9.9
- 9.5×10D
- 9.52
- 9.54
- 9.55
- 9.6
- 9.6×10D
- 9.65
- 9.7
- 9.7×10D
- 9.75
- 9.8
- 9.8×10D
- 9.85
- 9.9
- 9.9×10D
- 9.92
- 9.95
- 9.96
- 9.97
-
10～10.96
- 10
- 10,1
- 10,2
- 10,3
- 10,4
- 10,5
- 10,6
- 10,7
- 10,8
- 10,9
- 10×10D
- 10.0～10.4
- 10.00 - 10.49
- 10,25
- 10,75
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.1×10D
- 10.15
- 10.2
- 10.2×10D
- 10.25
- 10.26
- 10.3
- 10.3×10D
- 10.32
- 10.35
- 10.4
- 10.4×10D
- 10.45
- 10.5
- 10.5×10D
- 10.5～10.9
- 10.50 - 10.99
- 10.55
- 10.6
- 10.6×10D
- 10.65
- 10.7
- 10.7×10D
- 10.71
- 10.72
- 10.75
- 10.8
- 10.8×10D
- 10.85
- 10.9
- 10.9×10D
- 10.95
- 10.96
-
11～11.96
- 11
- 11,1
- 11,2
- 11,3
- 11,4
- 11,5
- 11,6
- 11,7
- 11,8
- 11,9
- 11×10D
- 11.0～11.4
- 11.00 - 11.49
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.1×10D
- 11.11
- 11.12
- 11.14
- 11.15
- 11.2
- 11.2×10D
- 11.22
- 11.24
- 11.25
- 11.3
- 11.3×10D
- 11.34
- 11.35
- 11.36
- 11.38
- 11.4
- 11.4×10D
- 11.45
- 11.5
- 11.5×10D
- 11.5～11.9
- 11.50 - 11.99
- 11.51
- 11.55
- 11.56
- 11.6
- 11.6×10D
- 11.65
- 11.7
- 11.7×10D
- 11.75
- 11.8
- 11.8×10D
- 11.85
- 11.9
- 11.9×10D
- 11.91
- 11.95
- 11.96
-
12～12.96
- 12
- 12,1
- 12,2
- 12,3
- 12,4
- 12,5
- 12,6
- 12,7
- 12,9
- 12×10D
- 12.0～12.4
- 12.00 - 12.49
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.25
- 12.3
- 12.4
- 12.5
- 12.5～12.9
- 12.50 - 12.99
- 12.55
- 12.6
- 12.7
- 12.75
- 12.8
- 12.9
- 12.96
-
13～13.95
- 13
- 13,1
- 13,4
- 13,5
- 13,7
- 13,8
- 13.0～13.4
- 13.00 - 13.49
- 13,25
- 13.1
- 13.2
- 13.25
- 13.3
- 13.4
- 13.487
- 13.49
- 13.5
- 13.5 to 13.9
- 13.50 - 13.99
- 13.6
- 13.65
- 13.7
- 13.75
- 13.8
- 13.89
- 13.9
- 13.95
-
14～14.96
- 14
- 14,1
- 14,2
- 14,3
- 14,5
- 14,6
- 14,7
- 14,8
- 14.0～14.4
- 14.00 - 14.99
- 14~16
- 14.1
- 14.2
- 14.25
- 14.275
- 14.29
- 14.3
- 14.4
- 14.5
- 14.5～14.9
- 14.6
- 14.68
- 14.69
- 14.7
- 14.75
- 14.8
- 14.9
- 14.95
- 14.96
-
15～15.95
- 15
- 15,1
- 15,3
- 15,5
- 15,6
- 15,7
- 15,8
- 15.0～15.9
- 15.00 - 15.99
- 15,25
- 15,88
- 15,875
- 15.08
- 15.1
- 15.2
- 15.25
- 15.3
- 15.4
- 15.48
- 15.5
- 15.6
- 15.7
- 15.75
- 15.8
- 15.87
- 15.9
- 15.95
-
16～16.9
- 16
- 16,1
- 16,3
- 16,5
- 16,8
- 16.0～16.9
- 16.00 - 16.99
- 16.1
- 16.2
- 16.25
- 16.27
- 16.3
- 16.4
- 16.5
- 16.5~19.5
- 16.6
- 16.662
- 16.67
- 16.7
- 16.75
- 16.8
- 16.9
-
17～17.9
- 17
- 17,5
- 17,8
- 17.0～17.9
- 17.00 - 17.99
- 17,86
- 17.07
- 17.1
- 17.2
- 17.25
- 17.3
- 17.4
- 17.45
- 17.46
- 17.5
- 17.6
- 17.7
- 17.75
- 17.8
- 17.86
- 17.9
-
18～18.9
- 18
- 18,5
- 18,8
- 18.0～18.9
- 18.00 - 18.99
- 18.1
- 18.2
- 18.25
- 18.26
- 18.3
- 18.4
- 18.5
- 18.6
- 18.65
- 18.7
- 18.75
- 18.8
- 18.9
-
19～19.95
- 19
- 19,5
- 19,05
- 19,8
- 19.0～19.9
- 19.00 - 19.99
- 19.05
- 19.1
- 19.2
- 19.25
- 19.3
- 19.4
- 19.45
- 19.5
- 19.6
- 19.7
- 19.75
- 19.8
- 19.84
- 19.9
- 19.95
-
20～20.9
- 20
- 20,5
- 20.0～20.9
- 20.00 - 20.99
- 20~23.9
- 20.1
- 20.2
- 20.24
- 20.25
- 20.3
- 20.4
- 20.5
- 20.6
- 20.62
- 20.625
- 20.64
- 20.7
- 20.75
- 20.8
- 20.9
-
21～21.9
- 21
- 21,5
- 21.0～21.9
- 21.00 - 21.99
- 21.03
- 21.1
- 21.2
- 21.25
- 21.3
- 21.4
- 21.43
- 21.5
- 21.6
- 21.7
- 21.75
- 21.8
- 21.83
- 21.9
-
22～22.9
- 22
- 22,5
- 22.0～22.9
- 22.00 - 22.99
- 22.1
- 22.2
- 22.22
- 22.225
- 22.25
- 22.3
- 22.4
- 22.5
- 22.6
- 22.62
- 22.7
- 22.75
- 22.8
- 22.9
-
23～23.9
- 23
- 23,5
- 23.0～23.9
- 23.00 - 23.99
- 23.02
- 23.1
- 23.2
- 23.25
- 23.3
- 23.4
- 23.42
- 23.5
- 23.6
- 23.7
- 23.75
- 23.79
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.0～24.9
- 24.00 - 24.99
- 24.1
- 24.2
- 24.21
- 24.25
- 24.3
- 24.4
- 24.5
- 24.6
- 24.61
- 24.7
- 24.75
- 24.8
- 24.9
-
25～25.9
- 25
- 25.0～25.9
- 25.00 - 25.99
- 25.1
- 25.2
- 25.25
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.75
- 25.8
- 25.9
-
26～26.99
- 26
- 26.00 - 26.99
- 26.1
- 26.19
- 26.2
- 26.25
- 26.3
- 26.4
- 26.5
- 26.59
- 26.6
- 26.7
- 26.75
- 26.8
- 26.9
- 26.97
- 26.975
- 26.99
-
27～27.9
- 27
- 27.00 - 27.99
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.75
- 27.78
- 27.8
- 27.9
-
28～28.9
- 28
- 28.00 - 28.99
- 28.1
- 28.2
- 28.25
- 28.3
- 28.4
- 28.5
- 28.57
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.00 - 29.99
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.5
- 30
- 30.00 - 30.99
- 30.1
- 30.14
- 30.15
- 30.5
-
31～31.75
- 31
- 31.00 - 33.00
- 31,75
- 31.5
- 31.75
-
32～32.5
- 32
- 32.3
- 32.5
-
33～33.5
- 33
- 33.325
- 33.5
-
34～34.925
- 34
- 34.5
- 34.925
-
35～35.5
- 35
- 35.5
-
36～36.91
- 36
- 36~43
- 36.5
- 36.91
-
37～37.7
- 37
- 37.5
- 37.7
-
38～38.5
- 38
- 38.1
- 38.5
-
39～39.675
- 39
- 39.5
- 39.67
- 39.675
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.275
- 41.5
-
42～42.85
- 42
- 42.5
- 42.84
- 42.85
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44~52
- 44.45
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.625
- 47
- 47.5
- 47.625
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52～52.5
- 52
- 52.5
-
53～53.975
- 53
- 53~63
- 53.5
- 53.975
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55~64
- 55.2
- 55.5
-
56～56.5
- 56
- 56.5
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.5
- 60
- 60.325
- 60.5
-
61～61.5
- 61
- 61.5
-
62～62.5
- 62
- 62.5
-
63～63.5
- 63
- 63.5
-
64～64.5
- 64
- 64.5
-
65～65.5
- 65
- 65.5
-
66～66.5
- 66
- 66.5
-
67～67.5
- 67
- 67.5
-
68～68.5
- 68
- 68.5
-
69～69.5
- 69
- 69.5
-
70～70.5
- 70
- 70.5
-
71～71.5
- 71
- 71.5
-
72～72.5
- 72
- 72.5
-
73～73.5
- 73
- 73.5
-
74～74.5
- 74
- 74.5
-
75
-
76
-
77
-
78
-
79～79.50
- 79
- 79.50
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94～94.50
- 94
- 94.50
-
95～95.50
- 95
- 95.50
-
96
-
97
-
98
-
99
-
100
-
103
-
105
-
110
-
115
-
120
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.8
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.3
- 11.4
- 11.5
- 11.7
- 11.8
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.05
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.55
- 19.6
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.05
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.25
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63～63.4
- 63
- 63.4
-
64
-
65～65.5
- 65
- 65.5
-
66
-
67～67.1
- 67
- 67.1
-
68
-
69
-
70
-
71～71.7
- 71
- 71.7
-
72
-
73
-
74
-
75
-
76～76.8
- 76
- 76.8
-
77
-
78
-
79
-
80
-
81～81.4
- 81
- 81.4
-
82
-
83
-
84
-
85～85.4
- 85
- 85.4
-
86
-
87
-
88
-
89
-
90～90.1
- 90
- 90.1
-
91
-
92
-
93
-
94～94.7
- 94
- 94.7
-
95
-
96
-
97
-
98～98.8
- 98
- 98.8
-
99
-
100
-
101
-
102
-
103～103.4
- 103
- 103.4
-
104
-
105
-
106
-
107
-
108～108.4
- 108
- 108.4
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
140
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
167
-
168
-
169
-
170
-
171
-
172
-
174
-
175
-
176
-
177
-
178
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
188
-
189
-
190
-
191
-
193
-
194
-
195
-
196
-
197
-
198
-
200
-
201
-
205
-
206
-
207
-
208
-
209
-
210
-
212～212.77
- 212
- 212.77
-
213
-
214
-
215
-
216
-
218
-
220
-
222
-
223
-
225
-
227
-
228
-
230
-
232
-
234
-
235
-
239
-
240
-
242
-
245
-
246
-
247
-
248
-
249.63
-
250
-
252
-
253
-
254
-
255
-
257
-
258
-
260～260.15
- 260
- 260.15
-
262
-
263
-
265
-
267
-
270
-
272
-
274
-
275
-
276
-
277
-
278
-
280
-
281.77
-
282
-
285
-
287
-
290
-
292
-
295
-
298
-
300
-
302
-
305
-
310
-
315
-
318
-
320
-
321
-
322
-
323～323.63
- 323
- 323.63
-
325
-
327
-
330
-
337
-
339.15
-
340
-
343
-
350
-
355
-
360
-
370
-
372
-
385
-
400
-
402
-
432
-
440
-
450
-
460
-
500
-
512
-
550
-
600
-
692
-
700
-
860
-
1030
-
-
work material
-
Tool Material Type
- HSS-Stahl
- Kobalt HSS
- Pulverisierter HSS-Stahl
- Carbid
- PCD
- Hartes Vanadium HSS
- Hochgradig pulverisierter HSS-Stahl
-
Overall Length L(mm)
-
Shank Type
-
Coating Y/N
-
Coating Type
-
With/without Oil Hole
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (50)
- GUHRING (138)
- NACHI(FUJIKOSHI) (66)
- OSG (66)
- SANDVIK (26)
- ATOM (20)
- DIJET (14)
- EIKOSHA (12)
- ISCAR (10)
- IWATA TOOL (10)
- NS TOOL (9)
- ISHIHASHI (5)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- FUKUDA (4)
- OKAZAKI SEIKO (4)
- TUNGALOY (4)
- WIDIN (4)
- TWININGS (3)
- UNION TOOL (3)
- DIXI (2)
- MAKITA (2)
- NIKKEN KOSAKUSHO (2)
- OMIKOGYO (2)
- ASAHI TOOLS (1)
- METABO (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Bohreinsätze
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.