KANEMITSU Flexibel mit Flansch
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
![SNS Flexible Wellenkupplung mit Flansch [SCL]](//chk0-de.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_b$)
SNS Flexible Wellenkupplung mit Flansch [SCL]
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· 1. Smoothly transmits the power from the shaft.
· 2. Does not transmit the machine vibration or shaft vibration to the other side.
· 3. Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· 4. The rotary shaft can be turned by hand from the outer side while being directly connected.
· 5. The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· 6. Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.
· * A simple structure that provides complete flexibility.
· The structure is comprised of a coupler body, coupler bolt, and rubber bushes which make it extremely easy to attach and remove.
· The rubber bushes are made of polymer materials and have flexibility, vibration resistance, and complete flexibility.
· * Has compatibility that is demanded anywhere at anytimeab∗ ： 222.62 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Flansch flexible Wellenkupplung, Kits für zu verbindende Teile
KANEMITSU
The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.ab∗ ： 7.31 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Flansch-Modell: montierte Schrauben für die Wellenkupplung
KANEMITSU
Schraube und Mutter sind aus EN 1.0038 Equiv., und Federscheibe, SWRH62.ab∗ ： 5.52 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Flexible Wellenkupplung mit Flansch [CL]
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.
[Features]
· Compliant with JIS B 1452.
· Compatible with nominal diameters of between ø90 and ø630.
· Material FC200ab∗ ： 96.64 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
SNS Flansch flexible Wellenkupplung, Kautschuktüllen
KANEMITSU
The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.- Mengenrabatt
ab∗ ： 1.68 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
- Sonderpreis
SNS Flexible Wellenkupplung mit Flansch [CL] (Motoranbauseite)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.- Mengenrabatt
ab∗ ： 35.44 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SNS Flexible Wellenkupplung mit Flansch [CL] (Pumpen Montageseite)
KANEMITSU
JIS B1452 standard. Compatible with nominal diameters of between ø90 and ø630. Material FC200.ab∗ ： 36.20 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Starre Flanschwellenkupplung [SRCL]
KANEMITSU
Compatible with use in high ranges of circumferential speeds. Standardized in nominal diameters of ø112 to ø355. A forged product that uses S35C as the materialab∗ ： 297.76 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Flexible Wellenkupplung mit Flansch [SCL] (Pumpen Montageseite)
KANEMITSU
JIS B1452 standard. High reliability due to the high speed rotation and shock resistance. Standardized in nominal diameters of ø112 to ø630. A forged product that uses S35C as the material
[Features]
· Satisfies all of the requirements of a flexible shaft coupling.
· Smoothly transmits the power from the shaft.
· Does not transmit the machine vibration or shaft vibration to the other side.
· Does not release any power (thrust) from pushing the shaft from the shaft coupling.
· The rotary shaft can be turned by hand from the outer side while being directly connected.
· The motor can be operated by itself, and inspection can be performed in the rotating direction by removing the coupling element (coupling bolt) and then rotating each of the machine shafts.
· Can easily measure the state of the direct connection (positional relationship of the two shafts) with the machinery.ab∗ ： 104.63 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Starre Flanschwellenkupplung [RCL]
KANEMITSU
JIS B1451 standard. Has the same outer diameter size as the flexible shaft coupling but with a higher transmission capacity, and it can be reliably connected using a bolt. A line up with a nominal diameter of ø112 to ø560, and uses FC200 as the materialab∗ ： 117.55 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 31.62 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 4225
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 34.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 46.30 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 6340
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 67.88 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 84.72 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 104.13 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 11080
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·ab∗ ： 120.72 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 188.19 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 14090
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 293.16 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
![SNS Flexible Wellenkupplung mit Flansch [SCL]](http://chk0-de.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_b$)
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| zulässiger Drehmomentbereich(N·m) |
| Max. Drehzahlbereich(r/min) |
| O.D. A(φ) |
| Gesamtlänge W(mm) |
| Eigenschaft |
| Haupteinheits-Material |
| Modell |
| Zulässiges Anzugsmoment(Nm) |
| Max. Drehzahl(r/min) |
| Zulässiger Exzentrizitätsbereich(mm) |
| Zulässiger Radialversatz(mm) |
| Zulässiger Winkelversatz(Grad) |
| Anwendung |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU |
| Artikelserie | SNS Flansch flexible Wellenkupplung, Kits für zu verbindende Teile | SNS Flansch-Modell: montierte Schrauben für die Wellenkupplung | SNS Flexible Wellenkupplung mit Flansch [CL] (Motoranbauseite) | SNS Flexible Wellenkupplung mit Flansch [CL] (Pumpen Montageseite) | SNS Flexible Wellenkupplung mit Flansch [SCL] (Pumpen Montageseite) | ||||||||||||||
| ab∗ | 222.62 € *Stückpreis Standardkonfiguration | 7.31 € *Stückpreis Standardkonfiguration | 5.52 € *Stückpreis Standardkonfiguration | 96.64 € *Stückpreis Standardkonfiguration | 1.68 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 35.44 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 36.20 € *Stückpreis Standardkonfiguration | 297.76 € *Stückpreis Standardkonfiguration | 104.63 € *Stückpreis Standardkonfiguration | 117.55 € *Stückpreis Standardkonfiguration | 31.62 € *Stückpreis Standardkonfiguration | 34.36 € *Stückpreis Standardkonfiguration | 46.30 € *Stückpreis Standardkonfiguration | 67.88 € *Stückpreis Standardkonfiguration | 84.72 € *Stückpreis Standardkonfiguration | 104.13 € *Stückpreis Standardkonfiguration | 120.72 € *Stückpreis Standardkonfiguration | 188.19 € *Stückpreis Standardkonfiguration | 293.16 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 9 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | 10 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 9 Arbeitstage |
| zulässiger Drehmomentbereich(N·m) | 5,000 bis weniger als 10,000 ～ 1000 bis weniger als 5000 | - | - | 3.01 bis 5.00 ～ 1000 bis weniger als 5000 | - | 5,000 bis weniger als 10,000 ～ 20.01 bis 50.00 | 3.01 bis 5.00 ～ 1000 bis weniger als 5000 | 50.01 bis 100.00 ～ 1000 bis weniger als 5000 | 5,000 bis weniger als 10,000 ～ 1000 bis weniger als 5000 | 5,000 bis weniger als 10,000 ～ 1000 bis weniger als 5000 | - | - | - | - | - | - | - | - | - |
| Max. Drehzahlbereich(r/min) | 1,001 bis 2,000 ～ 2001 bis 4,000 | - | - | 1,001 bis 2,000 ～ 2001 bis 4,000 | - | 1,001 bis 2,000 ～ 2001 bis 4,000 | 1,001 bis 2,000 ～ 2001 bis 4,000 | 4,001 bis 10,000 ～ 2001 bis 4,000 | 1,001 bis 2,000 ～ 2001 bis 4,000 | 1,001 bis 2,000 ～ 2001 bis 4,000 | - | - | - | - | - | - | - | - | - |
| O.D. A(φ) | 112 ～ 630 | - | - | 90 ～ 630 | - | 125 ～ 560 | 90 ～ 630 | 112 ～ 355 | 112 ～ 630 | 112 ～ 560 | - | - | - | - | - | - | - | - | - |
| Gesamtlänge W(mm) | 83 ～ 365 | - | - | 59 ～ 365 | - | 45 ～ 160 | 28 ～ 180 | 80 ～ 250 | 40 ～ 180 | 80 ～ 500 | - | - | - | - | - | - | - | - | - |
| Eigenschaft | Unbearbeitete Wellenbohrung | - | - | Unbearbeitete Wellenbohrung | - | Unbearbeitete Wellenbohrung | Unbearbeitete Wellenbohrung | Unbearbeitete Wellenbohrung | Unbearbeitete Wellenbohrung | Unbearbeitete Wellenbohrung | - | - | - | - | - | - | - | - | - |
| Haupteinheits-Material | - | Stahl | Stahl | Stahl | Harz | Stahl | Stahl | - | - | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl |
| Modell | Haupteinheit | Zubehörteile | Zubehörteile | Haupteinheit | Zubehörteile | Haupteinheit | Haupteinheit | Haupteinheit | Haupteinheit | Haupteinheit | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile |
| Zulässiges Anzugsmoment(Nm) | 15.7 ～ 15680 | - | - | 3.9 ～ 15680 | - | 24.5 ～ 9803.9 | 3.9 ～ 15686.3 | 78.4 ～ 4902 | 15.7 ～ 15686.3 | 61.7 ～ 30870 | - | - | - | - | - | - | - | - | - |
| Max. Drehzahl(r/min) | 1500 ～ 6000 | - | - | 1000 ～ 4000 | - | 1150 ～ 4000 | 1000 ～ 4000 | 3000 ～ 6000 | 1500 ～ 6000 | 1100 ～ 4000 | - | - | - | - | - | - | - | - | - |
| Zulässiger Exzentrizitätsbereich(mm) | 0.02 bis 0.2 | - | - | 0.02 bis 0.2 | - | - | - | 0.02 bis 0.2 | - | 0.02 bis 0.2 | - | - | - | - | - | - | - | - | - |
| Zulässiger Radialversatz(mm) | 0.05 ～ 0.1 | - | - | 0.05 ～ 0.1 | - | - | - | 0.05 | - | 0.05 ～ 0.1 | - | - | - | - | - | - | - | - | - |
| Zulässiger Winkelversatz(Grad) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Anwendung | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
![SNS Flexible Wellenkupplung mit Flansch [SCL]](http://chk0-de.misumi-ec.com/linked/material/mech/INT1/PHOTO/h-j.jpg?$product_view_c$)
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
zulässiger Drehmomentbereich(N·m)
-
Max. Drehzahlbereich(r/min)
-
O.D. A(φ)
-
Gesamtlänge W(mm)
-
Eigenschaft
- Schwingungsdämpfung
- Unbearbeitete Wellenbohrung
-
Haupteinheits-Material
-
Modell
-
Zulässiges Anzugsmoment(Nm)
-
Max. Drehzahl(r/min)
-
Zulässiger Exzentrizitätsbereich(mm)
-
Zulässiger Radialversatz(mm)
-
Zulässiger Winkelversatz(Grad)
-
Anwendung
Suchergebnisse durch Herstellerauswahl einschränken
-
- KANEMITSU (19)
- NBK (2)
- KAYSEVEN (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Flexibel mit Flansch
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.